CAC-BTS SERIES: Automated Test Station For Non-Refillable Cylinders

The Bump Automated Test Station is an easy to use device for the verification of sensor response of your multi gas or personal gas detectors. This simple bump test can be performed in less than 60 seconds and will give you the piece of mind that your instrument is responding to gas properly, prior to entering a confined space or dangerous gas area in a plant.

• Can be used with any make/model of instrument
• Can use any concentration of gas or cylinder size
• Green status light and flow meter varify gas flow
• Automatic shut-off
• One, Two or Three Channel Systems
• Push button operation for ease of use
• Lockable Nema 4X Cabinet
• Adjustable Flow timer (1-60 sec)

The Bump Test Station is a perfect complement to any company’s calibration or maintenance schedule and can be customized to fit your gas detection program. Bump Test Station is not intended to and/or should not be used to replace periodic instrument manufacturer’s recommended gas calibration interval.

Specifications:

• Part Numbers:
  • Single Channel ~ CACBTS101
  • Dual Channel ~ CACBTS201
  • Three Channel ~ CACBTS301
• Power: 220 volt power, 56″ cord supplied with unit
• Enclosure: Wall mounted, NEMA 4X
• Single Channel – 22″H x 11″W x 6.25″D
• Dual Channel – 22″H x 15″W x 7″D
• Flow Rate: 0.3 – 1.5LPM standard, others available
• Number of test @ 30 seconds:  224 per 60L ; 412 per 103L ; 448 per 112L
• Compatibility: Any diffusion or sample draw instrument, may require instrument manufacturer’s calibration adaptor.
• Cylinder size: 34L ; 65L ; 103L, 112L
• Test time: 1-60 seconds, 30 second standard with automatic shut off and reset switch

---