Hotline / Zalo: 033 44 13586
Stay connected:

GasAlertClip Extreme 2 Portable Gas detector, H2S/O2/CO/SO2



GasAlertClip Extreme 2: Continuous, alphanumeric LCD shows detector life remaining, alarm setpoints and advises self-test status

Supported Gases:

Choice one of below gases:

  • H2S – hydrogen sulfide
  • O2 – oxygen
  • CO – carbon monoxide
  • SO2 – sulfur dioxide


As the world’s most popular and widely used zero-maintenance gas detector, the GasAlertClip Extreme offers continuous, reliable protection. Available in two year or three year versions, this single gas detector requires no calibration, sensor replacement, battery replacement, or battery charging. Compatible with the MicroDock II automatic test system, the simplicity of the GasAlertClip Extreme combined with minimal training requirements and negligible maintenance costs, make the GasAlertClip Extreme one of the most cost-effective PPE solutions for facility workers and on-site contractors.

The remaining life of the detector is displayed in months, days, then hours. A full function self-test verifies sensor, circuitry and battery integrity as well as function of the audible, visual and vibrator alarms. Stored data can be transmitted directly by IR link to a cordless infrared printer for immediate printout, or to a personal computer by means of an IR adapter connected to the computer’s USB port.

The GasAlertClip Extreme has two alarm setpoints used to activate a high output 95 dB (typical) audible alarm, a bright, wide-angled quad LED visual alarm and a built-in vibrator alarm.

GasAlertClip Extreme 2 Features

  • Rugged, IP-66/67 highly water-resistant design
  • Two years of protection with zero maintenance costs
  • Built-in concussion-proof boot
  • Records and displays the peak alarm encountered and the time since the exposure occurred
  • Records and transmits gas alarm events encountered and the time elapsed since the event occurred
  • Provides typical 95 dB tone and bright, quad-LED indication on alarm
  • Internal vibrator alarm
  • Small size (1.1 x 2.0 x 3.2 in. / 28 x 50 x 81 mm) and lightweight (2.7 oz. / 76 g)
  • Maintenance free—no sensor or battery replacement, no calibration, no downtime
  • Two alarm levels (Low / High)
  • Full function self-test of: audible/visual alarms plus integrity of sensor, battery and circuitry
  • Continuously ON—one button activation, test and data transmission
  • Comes complete with pocket/belt clip and test cap
  • Instructions in local languages included
  • Optional alligator and hard hat clips available



Size 1.1 x 2.0 x 3.2 in. / 2.8 x 5.0 x 8.1 cm
Weight 2.7 oz. / 76 g
Temperature H2S: -40 to +122°F / -40 to +50°C
CO: -22 to +122°F / -30 to +50°C
SO2: -22 to +122°F / -30 to +50°C
O2: -4 to +122°F / -20 to +50°C
Humidity 5% – 95% RH (non-condensing)
Alarms – Visual, vibrating, audible (95dB)
– Low, High
Tests Full function self-test on activation and every 20 hours, and automatic battery test every 2 hours
Typical battery life Two years (H2S, CO, SO2 or O2) or three years (H2S or CO)


Gas Measuring Range Low Alarm Level1 High Alarm Level1
2 or 3 year detector
H2S 0 -100 ppm 10 ppm 15 ppm
CO 0 – 300 ppm 35 ppm (30 ppm UK/EU) 200 ppm
2 year detector only
SO2 0 – 100 ppm 5 ppm 10 ppm
O2 0 – 30.0 % by vol. 19.5 % 23.5 %




There are no reviews yet.

Be the first to review “GasAlertClip Extreme 2 Portable Gas detector, H2S/O2/CO/SO2”

You may also like…

Phone: 024 668 13586
Fax: +84 024 6675 4433
905 C6-K2, My Dinh 1, HN
Thibft kế web bởi