MON-SAT 8.00 - 18.00.SUNDAY CLOSED
Hotline / Zalo: 033 44 13586
Stay connected:
Close
MON-SAT 8.00 - 18.00.SUNDAY CLOSED

No. 5 – Calibration BW GasAlertMicroClip XL gas detector

No.-5-Hướng-dẫn-hiệu-chuẩn-Máy-đo-khí-BW-GasAlertMicroClip-XL.jpg

Calibration BW GasAlertMicroClip XL Prepare Calibration equipment: 1 Valid date gas cylinder, content: 25ppm H2S, 100ppm CO, 2.5%CH4 (50%LEL), 18% O2 Ballance N2. 1 Valve regulator 0.5L/M 1 30cm Tubing 1 Calibration cap for GasAlertMicroClip XL Step by Step: Calibration job in fresh air area Fully charged Step 1: Turn ON gas detector and let

More

No. 4 – Zero calibration for GasAlertMicroClip XL

Zero-GasAlertMicroClip-XL.jpg

Zero calibration When We need Zero Calibration? Use a gas detector for detect over measuring range. Gas sensor may poisoned. Test GasAlertMicroClip XL by non-gas standard ie: Lighter, cigarette, gas kitchen…. Where can be doing Zero Calibration GasAlertMicroClip XL In fresh air; No flammable gas, no toxic, Oxygen concentration around 20.9%VOL Performance: Turn ON unit,

More

BW GasAlertMax XT II – No. 5: Zero Calibration

Zero-BW-GasAlertMax-XT-II.jpg

Zero Cal. for GasAlertMax XT II Why We need Zero Calibration? The sensor of the gas detector will automatically drifting over time, it will faster drift when use unit in much toxic environment. Gas sensors can be poisoned when the user use this unit in an over-range concentration. How to Zero calibration GasAlertMax XT II

More

Calibration guide for GasAlertMax XT II

0.jpg

GasAlertMax XT II intro. GasAlertMax XT II Pumped, Go the distance and save with this smart, simple and economical way to compliance. Features & Benefits Monitors H2S, CO, O2 and combustibles One-button operation with robust, motorized pump Compatible with MicroDock II Tools and Equipments Calibration gas cylinder, content: 25ppm H2S, 100ppm CO, 18% O2 and

More

Crowcon #1: Why do we calibrate?

Crowcon #1: Why do we calibrate?

I’ve talked about bump testing your instrument, so it seems natural that we now cover the importance of calibrating. There are two main reasons for calibration. Firstly, gas detectors often operate in harsh environments: high and low temperatures and/or humidities; they may be exposed to contaminants, such as solvents, silicone etc; gas exposure; as well

More
Phone: 024 668 13586
Fax: +84 024 6675 4433
ANHVUCorporation
905 C6-K2, My Dinh 1, HN
Thibft kế web bởi Hoangweb.com