Description
| Model | Range | Low alarm setting range | High alarm setting range | Low alarm point | High alarm point |
| TGas-1031-FL | 0~100%LEL | 5%~10%LEL | 25%~80%LEL | 20%LEL | 50%LEL |
| Parameters | Characteristics |
| Detectable gas | Flammable gases, oxygen, poisonous and harmful gases |
| Measurement precision | ±5%F.S |
| Repeatability | 2% |
| Measurement range | Refer to lectotype table for details |
| Response time | <30s(T90) |
| Sampling method | Diffusion |
| Working environment | Temperature: -30℃ ~ 60℃
humidity: below 85% (non condensation) |
| Remote control mode | By the adjustment mode by infrared remote control, the detector can be adjusted without opening of cover |
| 4 ~ 20mA
output |
4~20mA output corresponding to 0 ~100%
maximum load 800 ohms |
| Alarm output | The effective alarm is 1 point or 2 points; each alarm shall use SPDT electronic relay.
Contact rating of alarm relay: Ohmic load: 5A@24VDC or 120VAC or 240VAC Inductive load: 50VA |
| Communication | Communication description: three-wire system parallel RS485 protocol, 32 points at most
Connection: Twisted pair with shield Distance: maximum 1000m |
| Input voltage | 24VDC±25%; power: 2W/way |
| Explosion-proof shell | Explosion-proof grade: ExdIICT5
Protection class: IP66 |
| Using cable | ≥2.5mm2×4 screened cable line, outside diameter of cable is required to be between 6mm~9mm |
More information

Calibration gas cylinder
Calibration gas detector
Colorimetric gas detection tubes
Combustible gas detector
Cylinder regulator
Fixed gas detector
Four gas detector
Gas detector
Gas detector accessories
Gas monitor panel
Multi-gas detector
Oxygen gas detector
Safety and rescue equipment
Toxic gas detector
VOCs gas detector












Reviews
There are no reviews yet.