ISC iBrid MX6 Multi gas detector (combustible, toxic gas and VOC)

31,280,000

ISC-logo-150x150

Description

The iBrid MX6is the most versatile six gas detector on the market. With several hundred possible gas sensor combinations and a wide range of configuration parameters, it detects explosive combustible gases, toxic, asphyxiating and VOCs (volatile organic compounds).

The iBrid MX6 is available in the classical diffusion version or with a remote gas sampling pump. This easily adaptable (and removable) pump allows gas sampling up to 30 meters away.

The iBrid MX6 Industrial scientific 6 gas detector

The iBrid MX6 multi gas detector can simultaneously monitor up to 6 gases from a wide range of cells: detection of explosive combustible gases, solvents and hydrocarbons, Cl2 (chlorine), CO (carbon monoxide), CO2 (carbon dioxide), ClO2 (dioxide chlorine), H2 (hydrogen), H2S (hydrogen sulfide), HCl (hydrochloric acid), HCN (cyanidric acid), NO (nitrogen monoxide), NO2 (nitrogen dioxide), NH3 (ammonia), O2 (oxygen), PH3 (phosphine), SO2 (sulfur dioxide) & VOC (PID 10.6 eV lamp for the detection of volatile organic compounds).

The Industrial Scientific iBrid MX6 gas detector clearly displays real-time measurements in ppm or % by volume. Thanks to an intuitive menu and a 5-key navigation pad, each user is able to quickly configure the various parameters and functionalities of the device.

iBrid MX6 multigas detector technical specifications

  • Sensors:
    – Combustible gases / Methane: catalytic diffusion and/or infrared absorption
    – CO2: infrared absorption
    – Oxygen and toxic gases: electrochemical
    – Volatile organic compounds: Photoionization (PID)
  • Display: STN colored graphic LCD
  • Case material: Lexan/ABS/stainless steel with rubber protective overmold
  • Dimensions:
    – 135 mm x 77 mm x 43 mm (5,3″ x 3,05″ x 1,7″) – without pump
    – 167 mm x 77 mm x 56 mm (6,6″ x 3,1″ x 2,2″) – with pump
  • Weight:
    409 g (14,4 oz) – without pump ; 511 g (18,0 oz) – with pump
  • Power supply/run time:
    – Lithium-ion rechargeable battery: usually 24 hours
    – Lithium-ion rechargeable extended battery: usually 36 hours
    – AA disposable alkaline batteries: usually 10.5 hours
  • Approvals:
    – IECEx/ATEX: EEx ia d IIC T4 Equipment group and category: II 2G
    – UL: Class I, Groues A,B,C,D T4 ; AEx ia d IIC T4
    – CSA: Class I, Groups A,B,C,D T4

Included with the device: universal charger, nylon carrying case, belt clip, hand strap, tool and calibration kit, user manual and quick start guide, training CD-ROM, hydrophobic dust filter and sampling hose (in aspirated mode).

Brand

Industrial Scientific - (ISC)

Whether you need gas detectors for area monitoring or personal protection, single-gas monitoring or multi-gas monitoring, we have a range of gas monitors to meet your needs.
  • ISC Ventis Pro: Detect up to five gases and connect teams with alarm sharing and remote live monitoring. A man-down alarm, panic button, and custom on-screen messages to make it easy to communicate in an emergency.
  • ISC Ventis MX4: Detect up to four gases in an ultra-portable, rugged monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump.
  • ISC MX6 iBrid: Detect up to six gases with hundreds of possible sensor combinations and an internal motorized pump. The MX6 iBrid adapts to provide advanced gas detection for sampling and permitting tasks.
ISC-logo-150x150

Body Specification

MX6 iBrid Specifications

SPECIFICATIONS
INSTRUMENT WARRANTY:

Warranted for as long as the instrument is supported by
Industrial Scientific Corporation

CASE MATERIAL:

Lexan/ABS/Stainless Steel w/protective rubber overmold

DIMENSIONS:

135 mm x 77 mm x 43 mm (5.3″ x 3.05″ x 1.7″) – without pump
167 mm x 77 mm x 56 mm (6.6″ x 3.1″ x 2.2″) – with pump

WEIGHT:

409 g (14.4 oz) typical – without pump; 511 g (18.0 oz) typical – with pump

DISPLAY/READOUT:

Color Graphic Liquid Crystal Display

POWER SOURCE/RUN TIMES:

Rechargeable Lithium-ion (Li-ion) Battery Pack (24 hours) – without pump

Rechargeable, Extended-Range Lithium-ion (Li-ion) Battery Pack

(36 hours) – without pump

Replaceable AA Alkaline Battery Pack (10.5 hours) – without pump

OPERATING TEMPERATURE RANGE:

-20ºC to 55ºC (-4ºF to 131ºF)

OPERATING HUMIDITY RANGE:

15% to 95% non-condensing (continuous)

MX6 iBrid Certification

CERTIFICATIONS:

UL Class I, Groups A,B,C,D T4; Class II, Groups F,G; AEx ia d IIC T4
CSA Class I, Groups A,B,C,D T4; Ex d ia IIC T4
MSHA CFR30, Part 22, Intrinsically safe for methane/air mixtures
ATEX Ex ia IIC T4 Ga / Ex ia I Ma; IP64
Equipment Group and Category: II 1G / I M1 (I M2 w/IR sensor)
IECEx Ex ia IIC T4 Ga / Ex ia I (Ex ia d I w/IR sensor)
ANZEx Ex ia s Zone 0 I, IP64 Asp., IP64 Dif. Ex ia s Zone 0 IIC T4
INMETRO Ex ia IIC T4 Ga
GOST-R PBExiadI X / 1ExiadIICT4 X
KOSHA Ex d ia IIC T4
China Ex Ex ia d I/IIC T4
China CPC Metrology Approval
* These specifications are based on performance averages and may vary by instrument

Sensor Specification

MX6 iBrid Sensor Measuring range

MEASURING RANGES:
SENSOR RANGE RESOLUTION
CATALYTIC BEAD
Combustible Gas 0-100% LEL 1%
Methane 0-5% vol 0.01%
ELECTROCHEMICAL
Ammonia 0-500 ppm 1
Carbon Monoxide 0-1,500 ppm 1
Carbon Monoxide (High Range) 0-9,999 ppm 1
Carbon Monoxide/Hydrogen low 0-1,000 ppm 1
Chlorine 0-50 ppm 0.1
Chlorine Dioxide 0-1 ppm 0.01
Carbon Monoxide/

Hydrogen Sulfide (COSH)

CO: 0-1,500 ppm

H2S: 0-500 ppm

1

0.1

Hydrogen 0-2,000 ppm 1
Hydrogen Chloride 0-30 ppm 0.1
Hydrogen Cyanide 0-30 ppm 0.1
Hydrogen Sulfide 0-500 ppm 0.1
Nitric Oxide 0-1,000 ppm 1
Nitrogen Dioxide 0-150 ppm 0.1
Oxygen 0-30% vol 0.1%
Phosphine 0-5 ppm 0.01
Phosphine (High Range) 0-1,000 ppm 1
Sulfur Dioxide 0-150 ppm 0.1
INFRARED
Hydrocarbons 0-100% LEL 1%
Methane (% vol) 0-100% vol 1%
Methane (% LEL) 0-100% LEL 1%
Carbon Dioxide 0-5% vol 0.01%
PHOTOIONIZATION
VOC 0-2,000 ppm 0.1

MX6 iBrid Sensors

PART NUMBER DESCRIPTION
17124975-1 Carbon Monoxide (CO)
17124975-2 Hydrogen Sulfide (H2S)
17124975-3 Oxygen (O2)
17124975-4 Nitrogen Dioxide (NO2)
17124975-5 Sulfur Dioxide (SO2)
17124975-6 Ammonia (NH3)
17124975-7 Chlorine (CI2)
17124975-8 Chlorine Dioxide (CIO2)
17124975-9 Phosphine (PH3)
17124975-A Hydrogen Chloride (HCI)
17124975-B Hydrogen Cyanide (HCN)
17124975-C Hydrogen (H2)
17124975-D Nitric Oxide (NO)
17124975-E Phosphine (PH3) (high)
17124975-G Carbon Monoxide (H2 low)
17124975-H Carbon Monoxide (high)
17124975-J Carbon Monoxide / Hydrogen Sulfide (CO/H2S)
17124975-K %LEL (Pentane)
17124975-L %LEL (Methane)
17124975-M Methane (0-5% volume)
17124975-N Methane IR (0-100% volume)
17124975-P Hydrocarbons IR (0-100% LEL)
17124975-Q Carbon Dioxide IR (0-5% volume)
17124975-R PID (VOCs)
17124975-S Methane (0-100% LEL)

 

Videos

Download

Reviews

There are no reviews yet.

Be the first to review “ISC iBrid MX6 Multi gas detector (combustible, toxic gas and VOC)”

You may also like…